bltd

Both of these tables are almost unbelievably priced- either or both would be perfect for the outdoor weather that’s just around the corner.

hedge coffee table:
“Deliberately designed on the same low square grid as our Resort to pull right up to the edge, or in between, chairs and ottoman in modular fashion. Spare lines can also do coffee or side table duty with any outdoor, even indoor, setup. Rustproof, UV-resistant metal design with a slightly iridescent charcoal powdercoat with a hand-welded lower-level X. Ready to go, no assembly required.”

$129.00, Buy it here.

rectangular side table:
“At your service to perch a tall iced tea, a good read, or a tube of SPF. Apartment balconies and urban decks dig its tiny footprint. Industrial steel in a ivory powdercoat. Levelers included. Indoor or sheltered outdoor sites.”

$39.95,
Buy it here.

This splayed leg dining table would also be great as a desk.

[posted by kris]

There are five different options for legs on this table, but the trestle legs seem to be the most distinctive…

“Dine or work in style, times infinity with our Multi Table. An easy, modern solution that’s ultimately versatile, the Multi Tabletop allows you to customize any dining nook, work area or home office over and over. Sleek and rectangular, the Multi Table comes in three sizes and four distinctive finishes that you can then pair with one (or more) of our Multi Table leg options.”

Small – 2″ H x 63″ W x 35″ D
Medium – 2″ H x 71″ W x 35″ D
Large – 2″ H x 79″ W x 35″ D

First of all, these pictures make this table look like it would be the perfect side to any modern living or bedroom area, second, take a look at the various uses. Not bad, eh?

“The Tall CU side table by Kristalia is functional as a table, bench, or service top… use next to a sofa, near a bed, or even in the garden or a public place. Made of rigid moulded polyurethane. Suitable for outdoor use. Sturdy and easy to clean. Versatile and practical to use anywhere!”

15 3/4 in H x 25 5/8 in W x 17 3/4 in D

This plank wood coffee/cocktail table catches the eye not only for the type of wood used, but also that it only has three legs. It seems to have the same sort of shape of the Girard Table, but in a less refined and rugged sort of way.

” Absolutely natural cocktail table in solid Margosa. Each table is made from an individual plank of wood and is completely unique.

The wood is dried for several months and allowed to develop natural cracks and separations. After being shaped, it is finished with a natural wax for protection.”

48 L x 21 W x 14 H inches

$100 savings on this simple turned leg console…not too shabby.

“hardwood. simple assembly required. high gloss white or coffee.”

52″w x 17″d x 30″h.

This has got to be one of the most bizarre pieces of furniture I’ve seen.

“Design your own personal drum table with interchangeable percussion inserts. Choose from four different sized tables to suit your musical and space needs. The smallest table accepts four of the smaller instruments and the largest accepts sixteen.”

2×2: $800 plus tax and shipping
2×4: $1500 plus tax and shipping
3×3: $1600 plus tax and shipping
4×4: $2900 plus tax and shipping

[posted by katie]

I’m impressed that this is under $50.

“Sturdy handmade iron rod frame with intricate sunburst of wire weaves together 60s groove, ethnic handicrafts, smart stacking functionality. Colorful olivine, yolk and grey epoxy powdercoat finishes are rustproof.”

15.5″dia.x13″H

[posted by katie]

The surface of these are smooth enough to look slightly like a cartoon version of a stump, which I find entirely amusing. A few of these next to a serious sofa could tone it down a bit and keep things humorous.

“These stools have a soft curve for comfort and the table’s flat surface holds a drink. At 17″ high and 21″ diameter, they’re happiest in multiples (like a forest)…”

Shown above from left to right: Chocolate, Bronze, Pewter
21″ x 21″ x 17″H

This is my favorite find of the week, if not a contender for this month. It has an affordable price tag as well as being designed in a smart way (for the reasons listed below), and- probably most importantly- it looks really sharp.

“Composed of two laser-cut and slotted sheets of steel, the Origami tables ship flat and require no tools or hardware to assemble. One sheet is the negative of the other, which eliminates waste during production and gives the tables a balanced, yet dynamic, form. The petal-like surfaces are sturdy and spacious, making a practical and sculptural side table, night stand or plant stand.”

Made in the USA from locally sourced steel
Colors: Red, White, and Black

20″(Width) x 20″(Length) x 19″(Height)

I have seen this before, but it wasn’t until I saw it in a room setting did I fully appreciate the detail of the base. It’s really a beautiful table, and even though it has a higher price tag it might be a good time to take the plunge and add something to your collection that you’ll most likely appreciate for years and years.

“The beautifully grained base flares and narrows in six arcs, creating a look of poised animation. Each upright is accented by brass hardware and is the balance point for the 3/4″ glass top. Reminiscent of the iconic Noguchi Table, the Moebius is a classic in its own right, blending rhythmic form with straightforward function.”

Walnut stained beechwood base with brass connectors, 3/4″ tempered glass top.
H 20.5″ W 28″

This little drum side table is now on sale and affordable enough to buy a few if you wanted to have multiples in a room.

[posted by kris]

I was at my friend’s great loft last weekend, and right in front of his >$18,000 sofa is this little blocky table. Certain that it too came with a large price tag, I was quite surprised to find out it was a $100 solid* wood table from Ikea. The photo doesn’t really do it justice. This little guy can hold his own in sophisticated settings. Trust me on this one.

The lower tray is completely removable.

edit: it’s actually not solid wood. But it certainly feels like it.

Fiberboard, Ash veneer, Clear acrylic lacquer, Ash veneer, Honeycomb structure recycled paper filling, Particleboard

Thanks Brad!

[posted by kris]

Today’s the last day you can save 15% on the Liege Workspace from DWR…

“The Liege Workspace includes a desk which can be assembled with the storage to your right or left side. Plus, these built-in drawers eliminate the need for another piece of furniture. The Brazo is an adjustable and dimmable LED lamp, and the Eames® Aluminum Management Chair is the definition of workspace classic.”

One Liege Desk in chestnut, H 30″ W 60″ D 30″, $2,600.00
One Eames® Aluminum Management Chair in white Spinneybeck Leather, H 31-34″ D 23″ W 23″, $1,999.00
One Brazo Task Lamp, H 14-21″ W 26.5″, $400.00

The base of this side table is made of layered wood blocks that can be rotated around to create your own customized look- providing an easy way to mix things up a bit without changing furniture.

Options/Finishes: Natural oak or Oak, stained brown

16.5" W x 22.5" H x 16.5" D